Firmware revision documention

[Andrew Pratt]

Guess what Rotel sent me this morning!
Note that the HD units indicates the newer models running the modified chipsets. If your machine is using these different chipsets please do not flash your firmware unless you've obtained the correct file directly from Rotel.

RSP 1066 Software Updates Release Notes

V1.2 to V1.32
- Added Dolby Digital EX feature.
- Added an IR code for Zone 2 control from the main zone.
- Added discrete IR codes for TUNE and PRESET modes.

V1.32 to V1.37
- Changed the default mode for Dolby Digital 2Ch sources to Dolby Pro Logic II
- Fixed a bug that did not allow front panel button operation of the PLII / 3 Stereo button when playing a Dolby Digital 2Ch source.
- Fixed conflicting displays on CB level settings between Front display and On-Screen Display to show correct levels for CB speaker(s).
- Fixed the output of Pro Logic II from reverting to 2Ch when playing a DD 2CH source, CB speakers were set to None and delay set to 10ms.

V1.37 to V1.41
- Fixed a change in the sound image when unit received a discrete IR ON command in Pro Logic II with Center speaker set to OFF.
- Removed a small buzz in surround speakers when in HDCD mode and with Multi-Input engaged.

V1.41 to V1.43
- Changed the OSD background color setting to Black for both Composite and S-Video Monitor out.

V1.43 to V1.44
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.

V1.44 to V1.45
- Balanced sound levels on DSP Music modes
-
V1.45 to V1.47
- Added subwoofer output to dts Neo:6 mode when using large front speakers.

V1.47 to V1.48

display now displays "Multi" when multi channel inputs are in use.

Rec out on the display is now replaced with the volume level.

the sub can now be turned off for different devices to assist with bass management.

Starting units V2.20

- Hardware change new software not backwards compatible
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.

V2.20 to V2.21
- Balanced sound levels on DSP Music modes
V2.21 to V2.23
- Added subwoofer output to dts Neo:6 mode when using large front speakers.

V2.23 to V2.24

display now displays "Multi" when multi channel inputs are in use.

Rec out on the display is now replaced with the volume level.

the sub can now be turned off for different devices to assist with bass management.

RSX 1055 Software Updates Release Notes

V1.37
- Changed the default mode for Dolby Digital 2Ch sources to Dolby Pro Logic II
- Fixed a bug that did not allow front panel button operation of the PLII / 3 Stereo button when playing a Dolby Digital 2Ch source.
- Fixed conflicting displays on CB level settings between Front display and On-Screen Display to show correct levels for CB speaker(s).
- Fixed the output of Pro Logic II from reverting to 2Ch when playing a DD 2CH source, CB speakers were set to None and delay set to 10ms.

V1.37 to V1.41
- Fixed a change in the sound image when unit received a discrete IR ON command in Pro Logic II with Center speaker set to OFF.

V1.41 to V1.42
- Changed some characters on the German OSD.

V1.41 to V1.43
- Changed the OSD background color setting to Black for both Composite and S-Video Monitor out.

V1.43 to V1.44
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.

V1.44 to V1.45
- Balanced sound levels on DSP Music modes
-
V1.45 to V1.46
- Corrected bug in Amplifier redirection

V1.46 to V1.47
- Added subwoofer output to dts Neo:6 mode when using large front speakers.

V1.47 to V1.48

display now displays "Multi" when multi channel inputs are in use.

Rec out on the display is now replaced with the volume level.

the sub can now be turned off for different devices to assist with bass management.

Starting units V2.20

- Hardware change new software not backwards compatible
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.

V2.20 to V2.21
- Balanced sound levels on DSP Music modes
- V2.21 to V2.22
V2.21 to V2.23
- Added subwoofer output to dts Neo:6 mode when using large front speakers.

V2.23 to V2.24

display now displays "Multi" when multi channel inputs are in use.

Rec out on the display is now replaced with the volume level.

the sub can now be turned off for different devices to assist with bass management.


RSX 1065 Software Update Release Notes

V1.1 to V1.2
- Added dts Neo:6 feature.
- Added Pro Logic II Music Panorama, Dimension, and Center Width settings.
- Added RS232 protocols for AM, FM, Pro Logic II, Neo:6 and OSD.
- Stopped the 10 numeric keys on the remote from switching inputs to TUNER when pressed.

V1.2 to V1.3
- Added 6.1/7.1 Channel output from Pro Logic II (with EPROM change.)
- Added delay times for CB speaker(s) in PLII.
- Boosted test tone levels by 10dB.
- Added discrete IR codes for Pro Logic II Cinema, PLII Music, 5Ch Stereo, 7Ch Stereo, and 2Ch Stereo.
- Boosted subwoofer output by +10dB.
- Added subwoofer level adjustment for the Multi-Input.
- Added IR codes for FM Mono and Memory.

V1.3 to V1.4
- Stopped the band and CH up/down keys on the remote from switching inputs to TUNER when pressed.

V1.4 to V1.42
- Added an IR code for Zone 2 control from the main zone.
- Added discrete IR codes for TUNE and PRESET modes.

V1.42 to V2.12 (Requires EPROM Change)
- Added Dolby Digital EX feature.

V2.12 to V2.16
- Changed the default mode for Dolby Digital 2Ch sources to Dolby Pro Logic II
- Fixed conflicting displays on CB level settings between Front display and On-Screen Display to show correct levels for CB speaker(s).
- Fixed the output of Pro Logic II from reverting to 2Ch when playing a DD 2CH source, CB speakers were set to None and delay set to 10ms.

V2.16 to V2.18
- Changed the OSD background color setting to Black for both Composite and S-Video Monitor out.
- Fixed a change in the sound image when unit received a discrete IR ON command in Pro Logic II with Center speaker set to OFF.
- Removed a small buzz from rear speakers when in HDCD mode and Multi-Input was engaged.

V2.18 to V2.19
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.

V2.19 to V2.20
- Balanced sound levels on DSP Music.

V2.20 to V2.21
- Added subwoofer output to dts Neo:6 mode when using large front speakers.



Starting units V 1.49

V1.49
- Hardware change new software not backwards compatible
- Added Dolby Digital EX feature.
- Changed the default mode for Dolby Digital 2Ch sources to Dolby Pro Logic II
- Fixed conflicting displays on CB level settings between Front display and On-Screen Display to show correct levels for CB speaker(s).
- Fixed the output of Pro Logic II from reverting to 2Ch when playing a DD 2CH source, CB speakers were set to None and delay set to 10ms.

V1.49 to V1.51
- Changed the OSD background color setting to Black for both Composite and S-Video Monitor out.
- Fixed a change in the sound image when unit received a discrete IR ON command in Pro Logic II with Center speaker set to OFF.

V1.51 to V1.52
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.

V1.52 to V1.53
- Balanced sound levels on DSP Music modes.

V1.53 to V1.54
- Added subwoofer output to dts Neo:6 mode when using large front speakers

[AlvaroD]

Thanks Andrew.

Didnt' knew the 1.47 was out.

Where can we find it ?

[Andrew Pratt]

fire me an email to prontopr@mts.net and I'll send it to you this evening or email rotel as request it.

[John LaCava]

Hi Andrew,

I sent you an email too. I'm looking for v2.2.3.

Did rotel mention the new software for flashing or are we still to telnet?

Sorry to be redundant but I thought the forum might benefit from seeing my question answered on the board.

Cheers,
John

[Arnold van Oostrum]

Well, it took some time, but this is a perfect list of firmware revision history! Compliments on Rotel.

[Andrew Pratt]

The only firmware's I have are for the older 1055 and 1066's. If you need a 2.X firmware I'd suggest emailing Mike Sheehan at msheehan@equityaudio.com and requesting the latest version

[LEVESQUE]

Thank you Andrew for your help. Keep up the good work!

I feel like a newb ops: , but what do you mean by "HD unit". HD??

[Danbry39]

Yes Andrew, you the man! One question. If I have firmware 2.20, do I have to do 2.21 first, then 2.23 or can I just go from 2.20 to 2.23.




Keith

[Andrew Pratt]

I don't see why you couldn't jump right to the latest firmware.

The HD units are the version that are shipping now. Due to a shortage in a part Rotel was forced to slightly alter the components used so they had to rewrite the firware so that it worked like the first version did. They've assured me that there's no difference between them as far as features or performances goes.

[fhidayat]

Andrew,
I just bought the rsx-1065 a couple weeks ago, not quite sure what f/w version I have, how do I find these information? and how do you "flash" it to bring it to current version? thanks for your response...Francesco




:banana:

[Andrew Pratt]

Hold down the mute button till the firmware is displayed on the display.

To flash the firmware take a look at the thread I bumped up the other day it contains all you need to know.

[fhidayat]

Thanks Andrew...it turned out I have f/w v.1.5.1 I feel that there is no immediate benefit to flash it at this point, but will follow your instruction in building the cable. I noticed that only 1066 owner can request the cable from Rotel, do they have a different f/w upgrade plan for the 1065 owners? fh




:banana:

[Andrew Pratt]

As far as I know its the same cable used for all Rotel models so I don't see why you couldn't request or make that cable as shown in that thread.

[MuShu007]

Finally got the update from Mike Sheehan for version 2.20,now if only I could get my dealer here in San Diego to flash it I'd be set. :P

[Arnold van Oostrum]

Note that the HD units indicates the newer models running the modified chipsets.

What does HD mean in this case?

[Andrew Pratt]

Not sure exactly what HD stands for.

[wanderso]

RSX 1065 Software Update Release Notes


V1.42 to V2.12 (Requires EPROM Change)
- Added Dolby Digital EX feature.

Andrew,

Do you have any idea what the EPROM change is? I convinced a friend to buy the 1065 back in May and he has the older EPROM/Firmware.

Wilson

[Arnold van Oostrum]

Do you have any idea what the EPROM change is? I convinced a friend to buy the 1065 back in May and he has the older EPROM/Firmware.

Wilson, let you friend take a look at his firmware. First the setup menu. If he has an old version, the menu will have the version number on the first screen at the bottom (that's v1.1 or v1.2 or v1.3)

If his menu doesn't show the version#, then press the remote mute button for a few seconds until firmware version shows in the display and look what it says. Then I can tell you if a eeprom change is needed.

[Andrew Pratt]

Thanks Arnold I'm not as familar with that model as the 1055/1066's so I'll defer to Arnolds expertise on this one.

[jaakan]

latest software version is v1.48 for 1066 10MHZ ver

[AlvaroD]

When was the 1.48 released ?

Do you know what has been changed ?

Thanks.

[Andrew Pratt]

1.48 is still in the beta testing phase. Its addressed some of our concerns but early reports are that there's still a few items that need addressing...obviously though since its still in beta nothings final yet. I'll let you all know as soon as it goes public.

[jaakan]

I got it monday emailed to me from Rotel and updated my Dad's 1066 from 1.37 to 1.48.

The big bug that I had before ( with 1.37 ) was the Terminater 2: U. E. - DTS ES chapter change temp audio drop outs bug. I think that the Sunfire Pro/pre III and U Rev had similer bug.

Update: this bug is fixed