RSP-1098 Firmware 2.20

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Iggurk
    Senior Member
    • Jun 2006
    • 114

    RSP-1098 Firmware 2.20

    Hello!

    Firmware 2.20 if anyone interested to upgrade.

    2.18 -> 2.19
    only a small display issue (no PrLogic Icon when playing 2CH PCM source)

    2.19 -> 2.20
    1 PCM2CH, 176K/192K support. When it is 176.4/192K, Temporary G.Delay, Tone can't be controlled
    2. Debugging backup error
    3. Component error
    4. Dolby request, During the 6.1/7.1 settings, use Dolby Pro Logic indication


    Be really carefull with the upgrade.

    To upgrade the main flash firmware to the current V2.2.0 the DSP EEPROM should be upgraded to V3.4. If you already have upgraded the DSP EEPROM to V3.4 then it is only the main flash software that should be upgraded.

    Details how to upgrade EPROM ist available on the Rotel website. However, it's not as easy as main firmware update. A EPROM Flash tool has to be installed on the computer, to be configured and then the EPROM software to be uploaded via this tool. All necessary elements are availbale from the Rotel Webiste (flash tool, firmware and instruction manual in english). If you fail to do this upgrade, hardware has to be changed and cost may be involved.

    Regards
    Yves
    Attached Files
  • Ferry
    Junior Member
    • May 2003
    • 19

    #2
    Any one installed this version?

    What are the findings/working........

    Comment

    • cadman
      Member
      • Sep 2003
      • 73

      #3
      RSP-1098 Firmware 2.20

      Is this a beta? I do not see it at rotel site

      Comment

      • Iggurk
        Senior Member
        • Jun 2006
        • 114

        #4
        Hello!

        Not a beta, got it from Rotel directlly.

        Updated my device with it without any issue.

        Ask Rotel if you prefer, just provide them your 1098 serial number.

        Regards
        Yves

        Comment

        • joetama
          Senior Member
          • May 2006
          • 786

          #5
          I was up to date with mine...

          I have to go home an figure out how to do this...

          Doesn't seem that hard however....
          -Joe

          Comment

          • mjb
            Super Senior Member
            • Mar 2005
            • 1483

            #6
            Just updated using this file ( from v2.18 ) , and everything appears to work fine! Thanks! :T
            - Mike

            Main System:
            B&W 802D, HTM2D, SCMS
            Classé SSP-800, CA-2200, CA-5100

            Comment

            Working...
            😀
            😂
            🥰
            😘
            🤢
            😎
            😞
            😡
            👍
            👎
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"