View Full Version : Mounting Hardware Sizes
08-15-2006, 09:59 PM
I am ordering my mounting hardware from McMaster.com and am not sure what size hardware to get. The speakers I am using are the RS28, RS150, and RS225. I have heard multiple sizes for the RS28, either #6 or #8, which one? The RS150 and the RS225 I assume a #10 would work, or should I go bigger on the RS225? Thanks for the help.
08-16-2006, 09:11 AM
I find #8 screws work best for the RS180s with #6 for the smaller tweeters. I like 1" for the length of the larger screws and 5/8 to 3/4 for the smaller driver screws. You might go down to #4 for mounting binding post plates or for mounting flared ports but I find the number 6s do well there too. I just realized that pocket hole screws look really neat and professional but you have to have a special screwdriver to put them in and take them out. Costs very little.
08-16-2006, 09:33 AM
I used the #6 x 3/4" screws for the RS28.
08-16-2006, 07:30 PM
Powered by vBulletin® Version 4.2.2 Copyright © 2015 vBulletin Solutions, Inc. All rights reserved.