B&K Ref 30 and subs

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Helier
    Junior Member
    • Dec 2001
    • 1

    B&K Ref 30 and subs

    Hello All!
    Because of DVD-A (Toshiba SD9200), I have my subs running from the mains out and no sub selected in the menus of both the Ref30 and the Toshiba.
    I suppose my question is, Am I missing anything with this set up?.
    The subs are M&K MX100(2), so each one is hooked up to the corresponding channel in stereo mode.
    The speakers are B&W N804s, HTM1,SCM1 sorrounds.
    Even though the center speaker is a big one I set it up as "small" and the crossover at 60Hz so the low bass will find its way to the sub.
    Any comments?
    Regards
    Helier
    regards
  • ErrolP
    Junior Member
    • Feb 2002
    • 2

    #2
    Helier
    Just noticed your note and setup and I have a B&K 305, B&W 804's and the HTM1 (? -- the less expensive one, 1 or 2). I noticed you have the cross over at 60. How well does that work for you and what experimentation did you do to arrive at that? I thought the 804's 'lacked bottom' as they say and you would want a higher cross over.
    Also, I thought I was losing something when I configured the center as small -- left it as large after one DVD though. Maybe I was too rash. It does seem I am getting way much more than I want with the center as large.

    Errol

    Comment

    Working...
    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"